Diskette drive -11 infrared port -11, Diskette drive, Infrared port – Toshiba Tecra 8100 User Manual
Page 151
User's Manual
Troubleshooting 9-11
Version
1
Last Saved on 10/12/99 02:16
Tecra 8100 User's Manual – 8100_UK.DOC – ENGLISH – Printed on 13/12/99 as IM8100UK
Diskette drive
For more information on the optional diskette drive, refer to Chapter 4,
Problem
Procedure
Drive does not
operate
There may be a faulty cable connection if you are
using an external drive. Check the connection to
the computer and to the drive.
Check the SelectBay lock on the bottom of the
computer. It should be in the lock position.
Check TSETUP, if Diskette Drive is not displayed
as the SelectBay module, remove the diskette
drive and reinsert it.
Some programs run
correctly, but others do
not
The software or hardware configuration may be
causing a problem. Make sure the hardware
configuration matches your software’s needs.
You cannot access the
internal/external 3 ½"
diskette drive
Try another diskette. If you can access this
diskette, the original diskette (not the diskette
drive) is probably causing the problem.
If problems persist, contact your dealer.
Infrared port
Refer also to the documentation for your IrDA compatible device and
related software.
Problem
Procedure
Infrared devices do
not work as expected
Make sure there is no obstruction blocking
communication between the computer and the
target device.
If problems persist, contact your dealer.