Toshiba Tecra 8100 - Manual (Page 158)

9-18 Troubleshooting User's Manual
Tecra 8100 User's Manual – 8100_UK.DOC – ENGLISH – Printed on 13/12/99 as IM8100UK
Choosing test options
Before the test begins, you are prompted to select whether to test the
following components. To select the test, type Y at the prompt, otherwise
type N.
Component Prompt
Diskette drive
Test the FDD (Y/N)?
This test writes patterns to the diskette. Use a
formatted, write-enabled diskette. Data on the
diskette will be destroyed.
Hard disk drive
Test the HDD (Y/N)?
This test writes a small amount of data to the
hard disk.
Printer
Test the Printer (Y/N)?
Before executing this test, make sure the printer
is connected and turned on.
If you select Y, the following prompt will appear:
Compatible with IBM printer (Y/N)?
Select Y for IBM compatible and N for non-
compatible. If you are not sure, select N.
Selecting Y for a non-compatible printer may
result in garble and processing of excess pages.