Toshiba Tecra 8100 - Manual (Page 62)

4-2 Operating Basics User's Manual
Tecra 8100 User's Manual – 8100_UK.DOC – ENGLISH – Printed on 13/12/99 as IM8100UK
AccuPoint II precautions
Under certain conditions the on-screen pointer may travel contrary to
AccuPoint II operation. For example, if
„ You touch the AccuPoint II during power-up.
„ You apply constant, soft pressure to the AccuPoint II.
„ There is a sudden temperature change.
„ Strong stress is applied to the AccuPoint II.
If such travelling occurs, it is not a malfunction. Wait a moment for the
pointer to stop, then continue operation.
Replacing the cap
The AccuPoint II cap is an expendable item that should be replaced after
prolonged use. There are six spare AccuPoint II caps supplied with
the computer.
1. To remove the AccuPoint II cap, firmly grasp the cap and pull it straight
up.
ACCUPOINT CAP
PEG
Removing the AccuPoint II cap
2. Position a new cap on the peg and press it into place.
The peg is square, so be careful to align the cap’s square hole with the peg.