Toshiba Tecra 8100 - Manual (Page 135)

User's Manual Optional Devices 8-13
Version
1
Last Saved on 10/12/99 02:16
Tecra 8100 User's Manual – 8100_UK.DOC – ENGLISH – Printed on 13/12/99 as IM8100UK
Expansion Station
You can connect the NetDock Port Replicator to an Expansion Station,
which provides two PCI card slots (½ and ¾ size), a 5" drive bay slot and
a 3.5" HDD slot. The Expansion Station’s 5" drive slot can accommodate
the same IDE modules (with an adaptor) as the computer’s SelectBay. It
cannot accommodate a diskette drive module. A different adaptor is
required to install a 2.5" HDD module in the 3.5" HDD slot.
„ The following slots and bays are available:
„ Two PCI card slots (PCI 2.2 standard) (½ size and ¾ size)
„ 5" drive bay (accommodates conventional devices or SelectBay IDE
modules with an adaptor)
„ 3.5" bay (accommodates HDDs, including 2.5" HDDs with an adaptor)
The computer cannot be booted from an IDE device in the Expansion Station.
When you install or remove a PCI card, be sure to disconnect the
AC adaptor.
CardDock
In addition to the ports available on the computer, a CardDock provides
audio line-in and line-out jacks and separate ports for PS/2™ mouse and
PS/2 keyboard. CardDock connects directly to the docking interface port
on the back of the computer so no cabling is necessary. The AC adaptor
connects the CardDock to a power source.
The following ports and connections are available on the CardDock.
„ External monitor
„ Parallel printer
„ Serial port
„ PS/2 mouse
„ PS/2 keyboard
„ DC IN socket
„ Security lock
„ Audio line-in, line-out
„ Universal Serial Bus (two)
„ PC card slot