beautypg.com

Keypad overlay, Keypad overlay -6, Turning on the overlays -6 – Toshiba Tecra 8100 User Manual

Page 82: Windows 95/98 special keys, Emulating fn key on external keyboard, Turning on the overlays

background image

5-6 The Keyboard

User's Manual

Tecra 8100 User's Manual – 8100_UK.DOC – ENGLISH – Printed on 13/12/99 as IM8100UK

Windows 95/98 special keys

The keyboard provides two keys that have special functions in

Windows 95/98: one activates the Start menu and the other has the

same function as the secondary mouse button.


This key activates the Windows 95/98 Start menu.


This key has the same function as the secondary mouse button.

Emulating Fn key on external keyboard

The Fn key is only on Toshiba keyboards. If you use an external keyboard

attached to the computer, you can execute Fn key combinations by

emulating the Fn key. For example, you might hold down left Shift + left
Ctrl

then press F3 to change the power up mode. It can be changed using

the Hardware Setup utility. See Chapter 1,

Introduction

, or Chapter 7,

TSETUP and Passwords

.

Keypad overlay

Your computer’s keyboard does not have an independent numeric

keypad, but its numeric keypad overlay functions like one.
The keys in the centre of the keyboard with white letters make up the

numeric keypad overlay. The overlay provides the same functions as the

numeric keypad on the 101/102-key enhanced keyboard in the next

illustration.

Turning on the overlays

The numeric keypad overlay can be used for numeric data input or cursor

and page control.

Arrow mode

To turn on the Arrow mode, press Fn + F10 (Arrow mode icon lights).

Now try cursor and page control using the keys shown in the following

picture. Press Fn + F10 again to turn off the overlay.