Toshiba Tecra 8100 - Manual (Page 39)

User's Manual The Grand Tour 2-5
Version
1
Last Saved on 10/12/99 02:16
Tecra 8100 User's Manual – 8100_UK.DOC – ENGLISH – Printed on 13/12/99 as IM8100UK
Back side
The Figure below shows the computer’s back panel.
EXTERNAL MONITOR
PORT
USB PORT
PARALLEL PORT SERIAL PORT
DOCKING INTERFACE PORT DC IN INFRARED PORT
PS/2 MOUSE/
KEYBOARD PORT
The back side of the computer
PS/2 mouse/
keyboard port
Use this port to connect an external PS/2
compatible mouse or keyboard. The computer
automatically recognizes which device you have
connected when you turn on the power.
External monitor port This 15-pin port, protected by a plastic cover, lets
you connect an external video display.
Serial port Use this 9-pin port to connect external serial
devices such as an external modem, a serial
mouse or printer.
Docking interface This port enables connection of an optional
NetDock Port Replicator described in the Options
section of Chapter 1, Introduction .
Keep foreign objects out of the docking interface port. A pin or similar
object can damage the computer’s circuitry. A plastic shutter protects the
connector. Be sure to attach it whenever a device is not connected.
DC IN 1V
DC IN Attach the AC adaptor to the DC IN socket and plug
the adaptor’s power cord into any wall outlet.
Parallel port This Centronics-compatible, 25-pin parallel port
is used to connect a parallel printer or other
parallel device. This port supports Extended
Capabilities Port (ECP) standard.