Toshiba Tecra 8100 - Manual (Page 156)

9-16 Troubleshooting User's Manual
Tecra 8100 User's Manual – 8100_UK.DOC – ENGLISH – Printed on 13/12/99 as IM8100UK
Hibernation
Refer also to the Toshiba Power Extensions section and Chapter 7,
TSETUP and Passwords .
Problem Procedure
Hibernation does
not work
Are you using a compression utility on C drive?
Hibernation will not work with Windows 95
Drvspace or other compression utility.
Hibernation will not work if the Windows 98 Drive
Converter converts the file allocation table to FAT32.
If problems persist, contact your dealer.
Memory expansion
Refer also to Chapter 8, Optional Devices , for information on installing
memory modules.
Problem Procedure
Beep sounds, and
computer halts when I
turn on the power
Make sure the memory module installed in the
expansion slot is appropriate. Modules with parts
numbers PA3004U-1M06, PA3005U-1M12 can
be installed. If another module has been
installed, follow the steps below.
1. Disconnect the AC adaptor and all peripheral
devices.
2. Remove the battery.
3. Remove the memory module.
4. Replace the battery and/or connect the
AC adaptor.
5. Turn on the power.
The computer does
not recognize the
memory module
There are two slots for memory modules. Make
sure one memory module is installed in slot A.
If a module is installed in slot B only, follow the
steps below.
1. Turn off the power.
2. Disconnect the AC adaptor and all peripheral
devices.
3. Remove the battery.
4. Remove the memory module from slot B and
install it in slot A.
5. Replace the battery and/or connect the
AC adaptor.
6. Turn on the power.
If problems persist, contact your dealer.