Toshiba Tecra 8100 - Manual (Page 66)

4-6 Operating Basics User's Manual
Tecra 8100 User's Manual – 8100_UK.DOC – ENGLISH – Printed on 13/12/99 as IM8100UK
Using CD-ROM/DVD-ROM drives
The text and illustrations in this section refer primarily to the CD-ROM
drive. However, operation is the same for the DVD-ROM drive.
The full-size drive provides high-performance execution of CD-ROM-based
programs. You can run either 12 cm (4.72") or 8 cm (3.15") compact
discs/digital video discs without an adaptor. An ATAPI interface controller is
used for CD-ROM operation. When the computer is accessing a CD-ROM,
an LED on the drive glows. Refer to Chapter 1, Introduction , and Appendix
A for additional information.
CD-ROM drive
CD 24-speed (outer edge)
DVD-ROM drive
CD 4-speed (centre) 24-speed (outer edge)
DVD
1.7-speed (centre) 6-speed (outer edge)
Loading CDs
To load CDs, follow the steps below and refer to the following illustrations.
1. Turn on the power.
2. a. Press the CD-ROM eject button to open the drawer slightly.
Pressing the CD-ROM eject button