Toshiba Tecra 8100 - Manual (Page 198)

H-2 K56flex User's Manual
Tecra 8100 User's Manual – 8100_UK.DOC – ENGLISH – Printed on 13/12/99 as IM8100UK
Result codes for a 56K connection
No. Result code Description
70 CONNECT 32000 EC* Connection at 32000 bits/s (reception only)
71 CONNECT 34000 EC* Connection at 34000 bits/s (reception only)
72 CONNECT 36000 EC* Connection at 36000 bits/s (reception only)
73 CONNECT 38000 EC* Connection at 38000 bits/s (reception only)
74 CONNECT 40000 EC* Connection at 40000 bits/s (reception only)
75 CONNECT 42000 EC* Connection at 42000 bits/s (reception only)
76 CONNECT 44000 EC* Connection at 44000 bits/s (reception only)
77 CONNECT 46000 EC* Connection at 46000 bits/s (reception only)
78 CONNECT 48000 EC* Connection at 48000 bits/s (reception only)
79 CONNECT 50000 EC* Connection at 50000 bits/s (reception only)
80 CONNECT 52000 EC* Connection at 52000 bits/s (reception only)
81 CONNECT 54000 EC* Connection at 54000 bits/s (reception only)
82 CONNECT 56000 EC* Connection at 56000 bits/s (reception only)
* EC stands for the Error Control method, which appears only when the
extended result codes configuration option is enabled. EC is replaced by one
of the following symbols, depending on the error control method used.
V42bis V.42 error control and V.42bis data compression
V42 V.42 error control only
NoEC No error control protocol
S-register
S38 56K Dial Line Rate
S38 sets the maximum 56K downstream that the modem
attempts to connect.
S38=0
56K disabled
S38=1 (default) 56K enabled: automatic speed selection -
maximum modem speed