Toshiba Tecra 8100 - Manual (Page 31)

User's Manual Introduction 1-11
Version
1
Last Saved on 10/12/99 02:16
Tecra 8100 User's Manual – 8100_UK.DOC – ENGLISH – Printed on 13/12/99 as IM8100UK
Ring indicator
power on
This feature lets the computer’s power be turned
on automatically when a call comes in from a
remote modem. When an internal modem
(preinstalled in some models) receives a call
from a remote modem, it sends a ring indicator
power on signal to the computer. This feature
works only in Resume mode.
Resume If you have to interrupt your work, you can turn off
the power without exiting from your software. Data is
maintained in the computer’s main memory. When
you turn on the power again, you can continue
working right where you left off.
Hibernation This feature lets you turn off the power without
exiting from your software. The contents of main
memory is saved to the hard disk, when you turn
on the power again, you can continue working
right where you left off.
Low battery
automatic
Hibernation
When battery power is exhausted to the point
that computer operation cannot be continued, the
system automatically enters Hibernation mode
and shuts down.
Heat dispersal To protect from overheating, the CPU has an
internal temperature sensor. If the computer’s
internal temperature rises to a certain level, the
cooling fan is turned on or the processing speed
is lowered. You can use the System window of
Power Save Modes in Power Saver (Windows 95
only) or the TSETUP program to select one of
three temperature controls.
• Maximum
performance
Turns on fan first, then if
necessary lowers CPU
processing speed.
• Performance Uses a combination of
fan and lowering the
CPU processing speed.
• Battery optimized Lowers the CPU
processing speed first,
then if necessary turns
on the fan.