Toshiba Tecra 8100 User Manual
Page 119
User's Manual
TSETUP and Passwords 7-17
Version
1
Last Saved on 10/12/99 02:16
Tecra 8100 User's Manual – 8100_UK.DOC – ENGLISH – Printed on 13/12/99 as IM8100UK
User password
To delete a user password, execute TSETUP, then:
1.
Press the Space or BkSp key to display the following prompt:
Password =
2.
Enter the currently registered password. The character string you
enter is displayed as a string of asterisks.
Password = ****
If you press Enter before entering the password, Registered will appear
on the display.
3.
Press Enter. If the character string you enter matches the registered
password, the password option is reset and the display changes to:
Not Registered
If they do not match, the following message appears along with a beep
indicating you must repeat step 2.
Entry Error!!
If you enter the password incorrectly three times, the screen will display:
Access denied!!
You will not be able to access the password item in the TSETUP menu. In
this case you must turn the power off and back on to retry the procedure.
4.
Follow the same procedures described in the earlier section, How to
set the password, to set a new user password.
After you register or delete a user password, if you press the reset switch
before turning off the power, your latest user password setting will be
cancelled.