Toshiba Tecra 8100 User Manual
Page 145
User's Manual
Troubleshooting 9-5
Version
1
Last Saved on 10/12/99 02:16
Tecra 8100 User's Manual – 8100_UK.DOC – ENGLISH – Printed on 13/12/99 as IM8100UK
Power switch
If the SelectBay lock is set to the unlock position you cannot turn on the
computer. Refer to Chapter 4,
, for more information.
Problem
Procedure
The computer does
not turn on when
you press the
power switch
Make sure the SelectBay lock is set to the lock
position and try again to turn on the computer.
If the computer still does not turn on, refer to the
sections Overheating power down, AC power
and Battery below.
Overheating power down
If the computer’s internal temperature becomes too high, the computer
will automatically enter Resume mode and shut down.
Problem
Procedure
Computer enters
Resume mode and
shuts down
Leave the computer off until its interior reaches
room temperature.
If the computer has reached room temperature
and still does not start, or if it starts but shuts
down quickly contact your dealer.
AC power
If you have trouble turning on the computer with the AC adaptor
connected, check the DC IN indicator. Refer to Chapter 6,
, for more information.
Problem
Procedure
AC adaptor doesn't
power the computer
(DC IN indicator
should glow green)
Check the connections. Make sure the cord is
firmly connected to the computer and a power
outlet.
Check the condition of the cord and terminals. If
the cord is frayed or damaged, replace it. If the
terminals are soiled, wipe them with cotton or a
clean cloth.
If the AC adaptor still does not power the
computer, contact your dealer.