Panel power on/off, System auto off, Resume error conditions -17 – Toshiba Tecra 8100 User Manual
Page 101: Panel power on/off -17 system auto off -17, Resume error conditions
User's Manual
Power and Power-Up Modes 6-17
Version
1
Last Saved on 10/12/99 02:16
Tecra 8100 User's Manual – 8100_UK.DOC – ENGLISH – Printed on 13/12/99 as IM8100UK
Resume error conditions
If a problem occurs with Resume, the following message appears when
you turn the computer on:
WARNING: RESUME FAILURE.
PRESS ANY KEY TO CONTINUE.
Press any key to restart the system. The computer reinitialises RAM and
resets all soft keys.
The resume failure message may be caused by one or more of
these conditions:
The backup battery and the battery pack are completely discharged,
and the system is not receiving power through the AC adaptor.
You turned off the power while the system was accessing a disk drive.
You removed the battery pack while operating the computer without
the AC adaptor connected.
You turned off the power while the system was sending or receiving
data through a serial port or parallel port.
You’re running a program that does not use the computer’s BIOS.
Panel power on/off
You can set up your computer so that power turns on automatically when
you open the display panel and turns off when you close it.
Refer to Chapter 7,
, for an explanation of how to
enable this convenient feature.
If you have enabled the Panel power on/off function, and you are shutting
the computer down in Suspend (Standby) mode, do not close the panel
before the suspend function is completed. If you do so, Resume will not
work.
System auto off
This feature turns the system off automatically if it is not used for a set
duration.
Refer to Chapter 7,
, for an explanation of how to
set the duration.