Xerox WorkCentre 7970-2606 - Manual (Page 73)

Security
Xerox ® WorkCentre ® 7970 Multifunction Printer 73
System Administrator Guide
Configuring Authentication Server Settings for SMB
1. On the Login Methods page, next to Authentication Servers, click Edit.
2. Under Authentication Type, select SMB (Windows NT 4) or SMB (Windows 2000/2003).
3. Click Add New.
4. Under Domain, type the domain name of your authentication server.
5. Select the address type.
6. Type the appropriately formatted address and port number.
7. Click Save.
8. To specify server settings for an alternate authentication server, click Add New.
9. To copy the settings from another server, select a server from the list and click Copy From.
10. Click Edit to update the settings.
Configuring Authentication Server Settings for LDAP
The printer uses the primary LDAP server for authentication, authorization, and personalization. The
primary LDAP server is the server that appears at the top of the LDAP server list on the LDAP Server
page in CentreWare Internet Services. If you already have configured LDAP server settings, the
printer uses this server automatically when you select LDAP as the network authentication or
authorization method. The printer only uses alternate LDAP servers for authorization and
personalization when primary LDAP server communication fails.
1. On the Login Methods page, next to Authentication Servers, click Edit.
2. Under Authentication Type, select LDAP.
3. Click Add New.
4. Configure LDAP server settings, then click Apply.
Configuring Xerox Secure Access Unified ID System Authentication Settings
When Xerox ® Secure Access authentication is configured, users swipe a pre-programmed identification
card at the control panel. The printer compares the user credentials to the information stored on the
Xerox ® Secure Access server. To use Xerox ® Secure Access, purchase and install the Xerox Secure Access
Unified ID System.
To configure access rights using Xerox Secure Access Unified ID System authentication:
•
Install the Xerox ® Secure Access authentication server software and configure it with user accounts.
For details, see the Xerox Secure Access Unified ID System documentation.
• Enable the Authentication and Accounting Configuration Web service. For details, see HTTP on
page 58.
• Format and configure identification cards.
• Connect your card reader to the USB Port.
• Set the login method to Xerox Secure Access - Unified ID System. For details, see Setting the Login
Method on page 69.
• Configure Xerox ® Secure Access Setup settings.
• Enable the Xerox ® Secure Access Web service. For details, see HTTP on page 58.