Xerox WorkCentre 7970-2606 - Manual (Page 186)

Faxing
186 Xerox ® WorkCentre ® 7970 Multifunction Printer
System Administrator Guide
Configuring Required Fax Settings at the Control Panel
Before you can send a fax at the control panel:
•
Enable the required embedded fax settings.
• Set the fax country.
• Configure the embedded fax settings.
Enabling Embedded Fax
1. At the printer control panel, press the Machine Status button, then touch the Tools tab.
2. Touch Service Settings>Embedded Fax Settings.
3. Touch Fax Setup.
4. Touch Enable.
5. Touch Save.
Setting the Fax Country at the Control Panel
1. At the printer control panel, press the Machine Status button, then touch the Tools tab.
2. Touch Service Settings>Embedded Fax Settings>Fax Country Setting.
3. Select your country from the list.
4. Touch Save.
Configuring Embedded Fax Settings
1. At the printer control panel, press the Machine Status button, then touch the Tools tab.
2. Touch Service Settings>Embedded Fax Settings.
3. Touch Line 1 Setup or Line 2 Setup.
4. Touch Fax Number, then type the fax number using the touch screen keypad.
5. Touch Line Name, type a Line Name for the printer using the touch screen keyboard, then touch
Save.
6. Under Options, select fax send and receive options.
7. If allowed, under Dial Type, select your dialing method. If you have a tone line, select Tone. If you
have a 10-pulse-per-second line, select Pulse. If in doubt, touch Tone.
Notes:
• Most countries use tone dialing.
• The Pulse/Tone feature is not available in some countries.
8. Touch Save.