Xerox WorkCentre M123-M128-6336 - Manual (Page 77)

Changing the Settings
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 System Administration Guide 77
Spool Activation of spool function.
Select from Disk, Memory, and Off.
If Disk is selected but not
recognized, Memory will be used. Disk/Memory/Off Disk
Max Spool Size The maximum receive buffer size
during spooling.
Can be set in 256 KB increments. 512–32768 KB 1024 KB
Max Receive
Buffer Size The maximum receive buffer size
during non-spooling.
Can be set in 32 KB increments. 64–1024 KB 256 KB
JCL Activation of JCL On/Off On
Print Mode Set the printer language. AUTO/PS*/PCL/
TIFF AUTO
Auto Master
Mode Activation of the automatic browse
master feature.
Not available when WINS server is
designated. On/Off On
Encrypt
Password Activation of the encrypt password
feature. On/Off On
Time Zone Set the time zone in units of
minutes. -720 to 720
minutes 0 (GMT –
Greenwich Mean
Time)
Daylight Savings Set Daylight Savings time. Set the
time, date, and month for both the
start date and end date of Daylight
Savings time. For example “1-
012803-023110” will advance the
system clock by one hour at 1 a.m.
on 28th March, and go back one
hour at 2 a.m. on 31st October.
hour-start-end
(h-hhddmm-
hhddmm) —
Maximum
Sessions Maximum connections of the
machine. 3–10 5
Unicode Support Enable the use of Unicode. If this
is disabled then the local code,
such as shift-JIS, will be used.
Enable/Disable Disable
DHCP Activation of DHCP. Yes/No Yes
Get WINS DHCP Activation of WINS DHCP. On/Off On
IP Address Set the IP address. — 0.0.0.0
Subnet Mask Set the subnet mask. — 0.0.0.0
Gateway
Address Set the gateway address. — 0.0.0.0
Item Remarks Value Default