Xerox WorkCentre M123-M128-6336 - Manual (Page 59)

Printer Status
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 System Administration Guide 59
• -
You can delete all your print data by specifying this option. If this option is issued by
a superuser, all the print data received by the machine can be deleted.
This option is invalid in the non-spool mode.
NOTE: Print data which consist of multiple files sent in one print instruction cannot be
deleted file by file. All the files will be deleted together.
NOTE: This command is invalid if no options are specified, or if there is no print data
which matches the option.
NOTE: You can only delete print data from the same workstation used to send the
print data. You cannot delete print data sent by other workstations.
NOTE: When a command to delete print data is received, the file will be deleted even
if it is in the process of being printed. Any unprinted data will be cancelled after the file
has been deleted.
Example
To delete the print data from printer fxPS for job number 351, enter the following
command:
%lprm -PfxPS 351
Printer Status
Solaris/HP-UX
The lpstat command is used to inquire about the status of the machine.
NOTE: In the non-spool mode, this function is available to Windows NT clients but not
to HP-UX/Solaris clients.
Command format
lpstat [option]
Command options
The following command options are available.
If no option is specified, all the print data-related information will be displayed.
The sequence of the options does not affect the outcome.
To use more than one argument at the same time, separate them by commas and
enclose all the arguments with “ ”.
E.g. %lpstat -u “user1,user2,user3”
• -o [printer name]
This option displays the print data for the specified printer.