Ifax environments, Ifax installation, Installation procedure – Xerox WorkCentre M123-M128-6336 User Manual
Page 138
14 Internet Fax
138
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 System Administration Guide
iFax Environments
System Requirements
The following options are required for the machine.
• Internet Fax Kit
• The machine is connected to the network using TCP/IP.
• The environment allows the sending and receiving of E-mail.
NOTE: A file may not print if the format differs from those in the above table.
NOTE: It is recommended to use Microsoft Outlook Express 5.5/6.0 or Netscape 7 as
an E-mail software.
iFax Installation
This section describes how to enable the iFax feature.
Installation Procedure
To use the iFax feature, configure the following settings on the machine.
Network Communication Setup
Use the touch screen to set the following ports to [Enabled].
• Receive E-mail
• Send E-mail
Item
Correspondent Specifications
ITU-T Recommendations
ITU-T T.37, T.30, F.185 and E.164
iFax format
Sending:
RFC2301 (TIFFprofileS/F/J) and 600 x 600
dpi
Receiving:
RFC2301 (TIFFprofileS/F/J/C)
Facsimile forwarding
RFC2304, RFC2305
DSN function
RFC1891, 1894
MDN function
RFC2298
SMTP receiving
RFC821, 822, 1869
POP3 receiving
RFC1939
MIME version
Version1.0 (RFC2049)