Printing the system settings list, Changing the settings – Xerox WorkCentre M123-M128-6336 User Manual
Page 33
System Settings
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 System Administration Guide
33
NOTE: CentreWare Internet Services is software that enables you to display,
configure and change the settings of the machine by using a browser on a computer
instead of the machine's control panel. For more information, refer to the CentreWare
Internet Service chapter of the User Guide.
Printing the System Settings List
Follow these steps to print the System Settings List:
1.
Press the
2.
Select the [Billing Meter/Print Report] tab.
3.
Select the [Print Report/List] option.
4.
Select the [Print Mode Settings] option.
5.
Select the [Settings List - Common Items] option.
6.
Press the
Changing the Settings
A user ID and password are required to change the settings. The default user ID and
password for the System Administrator are "11111" and "x-admin" respectively. It
allows you to access the System Settings described in this chapter.
NOTE: You are advised to change the default password. For further assistance,
contact your Xerox Welcome Center.
Follow these steps to change the default settings:
1.
Press the
on the control panel.
2.
Enter the default user ID “11111”
using the numeric keypad. If the
Authentication feature is
enabled, you may be required to
enter a password. The default
password is "x-admin".
3.
Select [Confirm] on the [System
Administrator Login] screen.