Xerox WorkCentre M123-M128-6336 - Manual (Page 149)

Problems using an SMB Environment
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 System Administration Guide 149
When there is no notification of error
When there is no message displayed on the client which has sent print request, the
possible causes, confirmation methods, and actions are as follows.
When there is no notification of printer error
When there is no notification of the completion of the job
Problems using an SMB Environment
This section explains what to do when a problem occurs while using SMB. The possible
causes, confirmation methods, and actions are as follows. If a problem still exists after
the corrective action has been performed, follow the Problem Solving Procedures on
page 143 to seek further assistance.
When the machine is not found from client computers – page 150
When printing fails – page 151
When the document cannot be deleted from the printer window – page 151
Cause Confirmation Method Action
The user is not registered in
the Notify list of the print
server. Use NAWADMIN or
PCONSOLE to check
whether the user name or
group name of the job is
registered. Register the user name or
group name of the job.
Cause Confirmation Method Action
When sending the print job
from the client, the NOTIFY
option is not specified. When sending the print job,
check whether the NOTIFY
option has been specified. When sending the print job,
specify the NOTIFY option.
NetWareCASTOFF has been
executed on the client.
–
Execute NetWareCASTON
on the client.
When sending a job using
NPRINT/CAPTURE/
PCONSOLE, the NOTIFY
option is not specified. When sending the job using
NPRINT/CAPTURE/
PCONSOLE, check whether
the NOTIFY option has been
specified. When sending the job using
NPRINT/CAPTURE/
PCONSOLE, specify the
NOTIFY option.