Xerox WorkCentre M123-M128-6336 - Manual (Page 19)

Modes
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 System Administration Guide 19
NOTE: These buttons do not respond when the machine is in the System Settings
mode.
All Services
Use this button to access all the services available on the machine.
NOTE: The arrangement of service icons displayed on the screen can be changed by
the Key Operator.
1. Press the button
on the control panel.
2. Use the scroll buttons to switch
between screens.
Features
Use this button to go back one previous screen. If you are using the [Job Status] screen
or [Machine Status] screen, press the button to return to the previous copy,
fax, or scan feature screen. The copy, fax, or scan feature screen does not change,
even if you press this button while you are in one of these screens. In this case, use
the button to select the copy, fax, or scan feature screen.
button
button
button
button