Xerox WorkCentre M123-M128-6336 - Manual (Page 47)

Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 System Administration Guide 47
4 UNIX TCP/IP
This chapter explains how to set up the machine to operate in a UNIX TCP/IP
environment. The UNIX Workstation Operating Systems (OS) supported are Solaris,
SunOS, and HP-UX. The following information is provided.
Information Checklist – page 47
UNIX TCP/IP Environments – page 48
UNIX TCP/IP Installation – page 48
Installation Procedure – page 48
Network Communication Setup – page 49
Workstation Setup – page 50
Test Print – page 55
Printing – page 55
Solaris/HP-UX – page 55
SunOS – page 57
Printer Status – page 59
Solaris/HP-UX – page 59
SunOS – page 60
-C Option – page 61
Information Checklist
Before installing the UNIX TCP/IP features on the machine, make sure that the
following items are available or have been performed.
Item By
An existing operational network utilizing a UNIX TCP/IP protocol is
required. These steps are not designed to install the UNIX TCP/IP
network. Customer
SunOS 4.1x, Solaris 1.x, 2.x, 7.x, 8.x, 9.x, HP-UX 9.x, 10.x, 11.x Customer
Make sure that the correct IP Address is being used for the machine. Customer
Make sure that the Gateway Address is set correctly. Customer
Make sure that the Subnet Mask is set correctly. Customer
Make sure that the Host Name is set correctly. Customer
Test the copy and fax features of the machine, to make sure that they are
installed fully and functioning correctly. Customer