Xerox WorkCentre M123-M128-6336 - Manual (Page 35)

System Settings
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 System Administration Guide 35
2. Select [Network Settings] on the
[System Settings] screen.
3. Select [Protocol Settings] on the
[Network Settings] screen.
4. Select [Ethernet Setting] and
[Change Settings].
5. Set up the port speed.
6. Select [Save].
Auto (10BASE-T/100BASE-TX)
Detects the transmission speed automatically at power on and adjusts itself
accordingly.
100BASE-TX (Full Duplex)
Sets the transmission speed to 100 Mbps (Full Duplex).
100BASE-TX (Half-Duplex)
Sets the transmission speed to 100 Mbps (Half-Duplex).
10BASE-T (Full Duplex)
Sets the transmission speed to 10 Mbps (Full Duplex).
10BASE-T (Half-Diplex)
Sets the transmission speed to 10 Mbps (Half-Duplex).