Xerox WorkCentre M123-M128-6336 - Manual (Page 106)

11 CentreWare Internet Services
106 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 System Administration Guide
• TBCP Filter (Only available when the optional PostScript Kit is installed.)
• Tree Name
• Context Name
• Frame Type
• Network Address
• Active Discovery
5. Select [Apply New Settings] to reflect the new setting.
6. Enter the user ID and password then select [OK].
NOTE: The default user ID is "11111" and the default password is "x-admin".
7. When the reboot message appears, select [Reboot].
NOTE: For more information about the contents of items, refer to the CentreWare
Internet Services chapter of the User Guide.
TCP/IP
This page allows you to configure the following TCP/IP settings.
NOTE: Some settings on this page will only be available after you restart CentreWare
Internet Services, or after the machine is switched off and on.
1. At the CentreWare Internet Services home page for the machine, select the
[Properties] tab.
2. In the [Properties] frame, select the plus symbol [+] to the left of the [Protocol
Settings] folder.
3. Select [TCP/IP].
4. Set up the following options to be displayed in the frame.
• Host Name
• Get IP Address
• IP Address
• Subnet Mask
• Gateway Address
• Get DNS Address
• DNS Address 1–3
• DNS Name
• Generate Domain Search List Automatically
• Domain Name 1–3
• Connection Time-Out
• Dynamic DNS Update