Xerox WorkCentre M123-M128-6336 - Manual (Page 134)

13 Scanning Services
134 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 System Administration Guide
Scan to FTP/SMB Setup
Information Checklist
Before enabling the feature, make sure that the following items are available or have
been performed. If Kerberos has been enabled, refer to Remote Authentication Setup
(If Required) on page 131
If problems are encountered during machine setup, refer to the Problem Solving
chapter of the User Guide.
Scan to FTP/SMB Environments
Network
The machine and the computer must be connected to a network and be able to
communicate using a TCP/IP protocol.
Item By
An existing operational network utilizing TCP/IP is required. These
procedures are not designed to install a network. Customer
Obtain and record the following information:
• IP address
• Gateway address
• Subnet mask
• Host name
Refer to the Glossary for additional information about the Gateway Address
and Subnet mask. Customer
Test the machine to make sure that it is installed fully and functioning
correctly. Customer
Set up the FTP or SMB server.
FTP server
• Windows NT4.0 Server, Windows 2000 Server, and Windows Server
2003:
Microsoft IIS 3.0 or later FTP Service must be installed.
• Windows NT4.0 Workstation and Windows 2000 Professional:
Microsoft IIS 3.0 or later FTP Service or Microsoft Peer Web Service 3.0
or later FTP Service must be installed.
• NetWare 5.x FTP Service
For information on each FTP service setting, refer to the user guide
provided with the software.
SMB server
The following OS installed computers provide shared folder function:
• Windows 95/Windows 98/Windows Me
• Windows NT4.0/Windows 2000/ Windows XP/Windows Server 2003
Customer