Xerox WorkCentre M123-M128-6336 - Manual (Page 147)

Problems using a NetWare Environment
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 System Administration Guide 147
The NetWare port is not
activated.
Print the System Settings
List, then check that the port
is activated.
Activate the NetWare port.
Print the System Settings
List. When using IPX/SPX,
check that the network
number remains set to
00000000 (NetWare server
down). When using TCP/IP,
check that the IP address
remains set to 0.0.0.0 (fixed
IP address not specified) or
an address supply server
(DHCP server down).
When using IPX/SPX, start
the NetWare server. When
using TCP/IP, set the fixed IP
address or start the address
supply server (DHCP).
Invalid printer configuration. Use NWADMIN or
PCONSOLE to check that the
printer configuration is
correct.* Use NWADMIN or
PCONSOLE to set the
following items.
Printer type: Parallel
Port: LPT 1
Printer Location: Auto Load
(Local).*
The default machine name is
invalid. Print the System Settings
List, then check that the
correct machine name is
entered. Specify the correct machine
name (printer server name).
No directory tree name is
specified. Print the System Settings
List, then check that a tree
name is specified. Specify a tree name.
No context is specified. Print the System Settings
List, and then check that a
context is specified. Specify a context.
The transport protocol of the
NetWare port is not specified
correctly. Use CentreWare Internet
Services to check that the
transport protocol is also
specified by the server. Select the transport protocol
that the server specifies.
A fault occurred during print
processing. Check the NetWare error of
the machine displayed on the
control panel. Switch the machine off and
on.
Cause Confirmation Method Action