Konica Minolta bizhub 282 - Manual (Page 98)

Scan to PC operations 3
362/350/282/250/222/200 3-23
Sca
n
t
o
PC op
er
at
ions
Chapter 3
Specifying double-sided transmission settings
1
Touch [Menu].
– If the optional fax kit has been installed, touch [FAX Menu].
2
Touch [2-Sided TX] on the Setting 1 tab.
– If the optional fax kit has been installed, touch [2-Sided TX] on the
Set 1 tab.
3
Select the appropriate binding margin position.
– Left Bind: The document is scanned with a binding margin on the
left side.
– Top Bind: The document is scanned with a binding margin at the
top.
– Auto: The binding margin is set according to the scanning direction.
4
Touch [Original Direction].
One-Touch Search Direct
Input
Quality&
Reduction Menu
Job List
SCANReady Standard Chain
100%
TSI TX Report
Rotation TX 2in1 2-Sided TX
Network Setting 1
TSI only
Setting 2
Memory
Free
Network Setting 1 Setting 2
Enter OFF
2-Sided TX
Top Bind
Original
Direction
Original Bind Direction
Left Bind
One-Touch Search Direct
Input
Quality&
Reduction Menu
Job List
SCANReady Standard Chain
100% Memory
Free
Auto