Konica Minolta bizhub 282 - Manual (Page 17)

Introduction
x-16 362/350/282/250/222/200
Explanation of manual conventions
8 Auxiliary functions
8-30
Au
xi
liary funct
ions
Chapter 8
8.10 Printing copies overlapping a different image ( Image
Overlay function)
Images previously stored on the hard disk can be printed overlapping copies.
To store an overlay image (Store Overlay)
The Image Overlay function is available only if optional hard disk HD-
504 is installed.
1 Position the overlay document to be stored on the hard disk.
2 Press the [Utility/Coun-
ter] key, and then touch
[User Setting].
The User Setting screen
appears.
CAUTION
Handling toner and toner bottles
Do not throw toner or the toner bottle into a fire.
Toner expelled from the fire may cause burns.
3 Select the size of the
area to be scanned.
To cancel changes to
the settings, touch
[Cancel].
? What do the Book
Erase settings do?
If a Book Erase set-
ting is selected, the
dark shadows
around the docu-
ment or along the center of the document can be erased.
4 Touch [Enter].
Titles indicate the contents of the section.
Touch panel screens are shown to
check the actual display.
Text that appears in this manner
describes supplemental information,
such as precautions, references and
actions, relating to steps.
Text that appears in this manner
provides answers to problems and
questions that may occur during
operation.
(The page shown above is an example only.)
Text highlighted in this manner indicates precautions to ensure safe use of this machine.
“Warning” indicates instructions that, when not observed, may result in fatal or critical injuries.
“Caution” indicates instructions that, when not observed, may result in serious injuries or
property damage.
WARNING , CAUTION
[ ]
Names highlighted as shown above
indicate keys on the control panel,
buttons in the touch panel, and the
power switches.
Text that appears in this manner
describes the function limitations
and options required to use certain
functions.