Konica Minolta bizhub 282 - Manual (Page 260)

Specifying management settings 7
362/350/282/250/222/200 7-29
Sp
ecif
yin
g
man
age
men
t
set
ti
ngs
Chapter 7
2
Note
Programmed one-touch dial buttons can be used for transmission even
if a prohibited communication mode has been specified.
If all communication modes are prohibited (modes 475 to 477), some
screens, such as those for specifying transmission settings, may not nor-
mally be displayed.
Settings at time of purchase
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected. The numbers on the right side indicate the page numbers with de-
scriptions for the corresponding function.
Bit 7 6 5 4 3 2 1 0
Setting 0 0 0 0 0 0 0 0 (HEX: 00)
Bit Description Setting Description Page Refer-
ence
7 Specifies whether or
not the use of the
computer (scanner)
is prohibited. 0 Permitted ----------
1 Prohibited
6 Specifies whether
settings for register-
ing fax addresses or
printing reports can
be specified by only
the administrator or
also by the user. 0 Settings can also be
specified by users. ----------
1 Settings can only be
specified in Administrator
mode.
5 Specifies whether or
not only recipient
names are displayed
(and the fax number
or address is not
displayed) in reports
and Job List screens
and when a one-
touch dial button is
touched.
* 1, * 2
0 Displayed ----------
1 Not displayed
4 ----------------------- 0 *Do not change this bit
when specifying setting
for this function. ----------
3 Specifies whether or
not the use of TCP-
Socket is prohibited. 0 Permitted ----------
1 Prohibited