Konica Minolta bizhub 282 - Manual (Page 256)

Specifying management settings 7
362/350/282/250/222/200 7-25
Sp
ecif
yin
g
man
age
men
t
set
ti
ngs
Chapter 7
Specifying settings concerning the transmission results for IP relay
transmissions (mode 382)
Specify the length of time until the transmission results for an IP relay trans-
mission times out and the operation that is performed when a timeout oc-
curs.
Settings at time of purchase
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected.
Bit 7 6 5 4 3 2 1 0
Setting 0 1 0 0 0 0 0 0 (HEX: 40)
Bit Description Setting Description Page Refer-
ence
7 Specifies the opera-
tion that is performed
when the return of
transmission results
for an IP relay trans-
mission times out. 0 Transmission error ----------
1 Normal transmission
6, 5, 4, 3 Specifies the length of
time until transmission
results for an IP relay
transmission times
out.
*
0000 0 minutes ----------
0001 5 minutes
0010 10 minutes
0011 15 minutes
0100 20 minutes
0101 30 minutes
0110 40 minutes
0111 50 minutes
1000 1 hour
1001 2 hours
1010 3 hours
1011 4 hours
1100 5 hours
1101 6 hours
1110 7 hours
1111 8 hours
2, 1, 0 -------------------------- 000 *Do not change these bits
when specifying setting for
this function. ----------