Konica Minolta bizhub 282 User Manual
Page 252
Specifying management settings
7
362/350/282/250/222/200
7-21
Sp
ecif
yin
g
man
age
men
t
set
ti
ngs
Chapter 7
Specifying whether transmission source information is added when
performing an IP relay operation or forwarding received documents
(mode 352)
Specify how transmission source information is added when performing an
IP relay operation or forwarding received documents.
Settings at time of purchase
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected.
Bit
7 6 5 4 3 2 1 0
Setting
1 1 0 1 0 0 0 0 (HEX: D0)
Bit
Description
Setting
Description
Page Refer-
ence
7
--------------------------
1
*Do not change this bit
when specifying settings
for this function.
----------
6
Specifies where trans-
mission source infor-
mation is added with
IP relay operations.
0
Outside of the document
----------
1
Inside the document
5
Specifies whether or
not a transmission
source information is
added to received
documents that are
forwarded.
0
Not added
----------
1
Added
4
Specifies how trans-
mission source infor-
mation is added when
a received document
is forwarded.
0
Outside of the document
----------
1
Inside the document
3, 2, 1, 0
--------------------------
0000
*Do not change these bits
when specifying setting for
this function.
----------