Konica Minolta bizhub 282 User Manual
Page 47
2
IP address faxing
2-22
362/350/282/250/222/200
IP ad
dr
es
s
fa
x
ing
Chapter 2
Specifying the transmission report printing condition
The conditions for printing the transmission result report can be specified.
The conditions for printing the transmission result report are preset with the
“Report Settings” parameters from the Administrator Management 1 screen.
Follow the procedure described below to change these conditions.
1
Touch [Menu].
–
If the optional fax kit has been installed, touch [FAX Menu].
2
Touch [TX Report] on the Setting 1 tab.
–
If the optional fax kit has been installed, touch [TX Report] on the
Set 1 tab.
3
Specify the desired printing condition, and then touch [Enter].
One-Touch Search
Direct
Input
Quality&
Reduction
Menu
Job List
SCANReady
Standard
Chain
100%
TSI
TX Report
Rotation TX
2in1
2-Sided TX
Network
Setting 1
TSI only
Setting 2
Memory
Free
Enter
TX Report
If TX Fails
OFF
ON
Default
Single Dest:
If TX
Fails
Broadcast
:
:
Network
Setting 1
Setting 2
One-Touch Search
Direct
Input
Quality&
Reduction
Menu
Job List
100%
Memory
Free
SCANReady
Standard
Chain
If TX
Fails