Konica Minolta bizhub 282 - Manual (Page 185)

5 IP Relay operations
5-22 362/350/282/250/222/200
IP Relay operations
Chap
te
r 5
2
Note
The following parameters have no effect, even if settings have been spec-
ified.
- “Subject Selection” on the Network tab
- “Reply Address” on the Network tab
- “File Name” on the Network tab
- “EMail Notification” on the Network tab
Specifying the transmission report printing condition
The conditions for printing the transmission result report can be specified.
The conditions for printing the transmission result report are preset with the
“Report Settings” parameters from the Administrator Management 1 screen.
Follow the procedure described below to change these conditions.
1
Touch [Menu].
– If the optional fax kit has been installed, touch [FAX Menu].
2
Touch [TX Report] on the Setting 1 tab.
– If the optional fax kit has been installed, touch [TX Report] on the
Set 1 tab.
One-Touch Search Direct
Input
Quality&
Reduction Menu
Job List
SCANReady Standard Chain
100%
TSI TX Report
Rotation TX 2in1 2-Sided TX
Network Setting 1
TSI only
Setting 2
Memory
Free