Konica Minolta bizhub 282 - Manual (Page 261)

7 Specifying management settings
7-30 362/350/282/250/222/200
Sp
ecif
yin
g
man
age
men
t
set
ti
ngs
Chapter 7
*1 If bit 6 is set to “1”, the settings will not be applied if bit 5 is set to “1” (not
displayed). If you do not wish to display the fax number or address of the re-
cipient, bit 6 must also be set to “1” (settings can only be specified in Admin-
istrator mode).
*2 If the recipient is directly specified from the Direct Input tab, the recipient
is displayed, even if “1” (not displayed) is selected.
Specifying the deleting method for [Del.] in input screens (mode 478)
Specify the deleting method for [Del.] in input screens.
Select whether the character at cursor’s position or the character to the left
of the cursor is deleted.
Settings at time of purchase
Specifying the setting
The grayed out cells are the settings at the time of purchase.
2, 1, 0 ----------------------- 000 *Do not change these bits
when specifying setting
for this function. ----------
Bit Description Setting Description Page Refer-
ence
Bit 7 6 5 4 3 2 1 0
Setting (North
American
model) 1 0 0 0 0 0 0 0 (HEX: 80)
Setting (Oth-
er model) 0 0 0 0 0 0 0 0 (HEX: 00)
Bit Description Setting Description Page Refer-
ence
7 Specify the deleting
method for [Del.] in in-
put screens. 0 Deletes the character at
the cursor’s position p. 9-4
1 Deletes the character to
the left of the cursor
6, 5, 4, 3,
2, 1, 0 ---------------------- 0000000 *Do not change these bits
when specifying setting for
this function. ----------