Konica Minolta bizhub 282 User Manual
Konica Minolta Printers
This manual is related to the following products:
Table of contents
Document Outline
- Contents
- Introduction
- 1 Features
- 2 IP address faxing
- 3 Scan to PC operations
- 4 IP Scanner
- 4.1 Before using IP Scanner
- 4.2 Installing/uninstalling utilities
- 4.3 IP Scanner operations
- Main window
- Available commands
- Scanner Settings dialog box
- Sort Settings dialog box (Scanner tab)
- Sort Settings dialog box (RX Document tab)
- Sort Settings dialog box (TX Document tab)
- Divided Settings dialog box
- Receive Notify Settings dialog box
- ViewWindow
- Printer Setting dialog box
- Print Property dialog box
- 4.4 ImageReceiver operations
- 4.5 Registering scan buttons and scan operations
- General operation
- Starting IP Scanner
- Registering a scan button
- Scanning a document using the registered settings
- Viewing the scanned image
- Specifying automatic printing with IP Scanner
- Automatically printing with IP Scanner
- Specifying automatic printing with ImageReceiver
- Automatically printing using a one-touch dial button
- Exiting IP Scanner
- 4.6 Other operations
- 5 IP Relay operations
- 6 Specifying settings using PageScope Web Connection
- 7 Specifying management settings
- 7.1 Available parameters
- 7.2 IP Relay Settings
- 7.3 Specifying software switch settings (machine functions)
- Software SW settings
- To specify a software switch setting
- Specifying settings to limit dialing and broadcast transmissions (mode 018)
- Specifying settings for the image in the results report (Mode 023)
- Specifying settings for checked receiver transmissions (mode 200)
- Specifying transmission source information for IP address faxing (mode 351)
- Specifying whether transmission source information is added when performing an IP relay operation or forwarding received documents (mode 352)
- Specifying the default address input screen (mode 366)
- Specifying settings for the information indicated in the report for IP relay transmissions (mode 368)
- Specifies the coding method for IP relay transmissions (mode 381)
- Specifying settings concerning the transmission results for IP relay transmissions (mode 382)
- Specifying settings to limit the use of communication modes-1 (mode 475)
- Specifying settings to limit the use of communication modes-2 (mode 476)
- Specifying settings to limit the use of communication modes-3/Specifying restrictions for registering fax addresses and printing reports and specifying how one-touch dial recipients are displayed (mode 477)
- Specifying the deleting method for [Del.] in input screens (mode 478)
- Specifying settings for limiting user authentication to only Scan functions (mode 479)
- 8 Troubleshooting
- 9 Appendix