Konica Minolta bizhub 282 - Manual (Page 120)

IP Scanner 4
362/350/282/250/222/200 4-5
IP
Scan
ne
r
Chapter 4
ImageReceiver port conflicts
If a mail server is running on a computer installed with IP Scanner, a confir-
mation message appears.
If IP Scanner (and ImageReceiver) and the mail server are being used on the
same computer, click [Change ImageReceiver port].
However, to use this function, the setting must match the Port setting for the
one-touch dial button used with the Scan to PC operation.
The port number can be checked after it is changed by clicking “Help”, then
“Computer Information” in IP Scanner.
When using IP Scanner (and ImageReceiver) without changing the port
number, stop the mail server, and then restart ImageReceiver.
If the port number was unintentionally changed, uninstall IP Scanner, and
then install it again.
SSL transmissions
- Transmissions for using IP Scanner to program/delete scan buttons can
be encrypted.