Balboa Water Group Titan Bath Control - Manual (Page 55)

Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,
834 b2, Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
55
42135F
2 & 6 Button Error Codes
code message description
E12 [a] Reload Configuration Table (No Configuration Table) The Panel does not have a configuration table loaded
E04 [b] Missing Blower IBC The Panel can not communicate with the Blower
E02 [b] Missing Secondary Box (PVC, VSC) The Primary Box cannot communicate with the Secondary Box
E01 [b] Missing Primary Box (PVC, VSC) The Panel can not communicate with the Primary Box
E05 [c] Primary Comm lost The Primary Box has stopped communicating with the Panel
E08 [c] Blower Comm lost The Blower has stopped communicating with the Panel
E11 [a] ROM checksum fail Checksum error in the Panel program
E09 [a] Module type error Module is incorrect type
E10 [a] No zero-cross interrupts No zero-cross interrupt
E06 [c] Secondary Comm lost The Secondary box has stopped communicating with the Primary
E07 [c] Expansion Comm lost The Expansion box has stopped communicating with the Primary
E03 [b] Missing Expansion box The Primary box cannot communicate with the Expansion box
message 1 message 2 message 3 message 4
Err E12 no CFG
Err E04 no IbC
Err E02 no Ut2
Err E01 no Ut1
Err E05 Ut1 Cnn
Err E08 IbC Cnn
Err E11 Ut CSU
Err E09 Ut tYP
Err E10 0 CrS
Err E06 Ut2 Cnn
Err E07 Ut3 Cnn
Err E03 no Ut3
codes, type of errors
[a] Internal, serious errors that should never occur
[b] Startup errors when a box cannot be located on the IR Link
[c] Runtime errors when a box stops communicating on the IR Link
Notes:
• Ut stands for Under Tub box.
• IbC stands for Integrated Blower Control -- our blower with the box electronics built in.
• Startup and Runtime errors are communication related and will occur if boxes required by the
configuration are missing or communications are lost while running.
Error Codes