Balboa Water Group Titan Bath Control - Manual (Page 45)

4 Button Bath Control User Guide -
Blower light
Increase speed reduce speed
Please see reverse side for more information.
Blower
Blower speed
• If the Blower is off, press the Blower button once to turn the Blower On.
• If the Blower is on, press the Blower button once to turn the Blower Off.
• Click the + or - button to increase or decrease the speed in steps.
• Press and hold the + or - button to increase or decrease the speed smoothly.
modes (turn on, beginning with blower off)
• Press the Blower button twice to put the Blower in Pulse mode, or
• Press the Blower button three times to put the Blower in Wave mode.
Light
• If you have a light installed, the light can be controlled independently of all
other features.
• Some lighting options have unique operation for color changes. See the
manual for any special light system that may be installed.
Power up
• Upon power up, the LEDs flash as
the bath control goes through a
self diagnostic check. Once the
LEDs stop flashing, you may use
the control.
session timer
• Turning on a device starts a
Session Timer that lasts for
20 minutes.
optional heated Quiet-flo Blower
• Any time the blower turns on, the
heater turns on with it.
Blower, Light, Speed Buttons
40936 A July 29, 2013