Balboa Water Group Titan Bath Control - Manual (Page 30)

Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,
834 b2, Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
30 7/14/14
PumP codes
• Pumps are specified as either single or variable speed.
• A single-speed pump is truly single speed and does not provide for speed adjustment or Wave mode.
• The Plus and Minus codes cannot be assigned to a panel if the associated pump is single-speed.
• Two pumps may be assigned to a system, on either a VSC or PVC.
code location speeds function
PPump Primary Single Turns the pump on and off.
PPumpV Primary Variable Turns the pump on and off. holding the button ramps the speed. Pressing
twice at startup puts the pump in Wave mode.
PPumpPlus Primary (Variable) Clicking increases the pump speed 1 step. holding ramps the speed up
until released.
PPumpMinus Primary (Variable) Clicking reduces the pump speed 1 step. holding ramps the speed down
until released.
SPump Secondary Single Turns the pump on and off.
SPumpV Secondary Variable holding the button ramps the speed. Pressing twice at startup puts the
pump in Wave mode.
SPumpPlus Secondary (Variable) Clicking increases the pump speed 1 step. holding ramps the speed up
until released.
SPumpMinus Secondary (Variable) Clicking reduces the pump speed 1 step. holding ramps the speed down
until released.
TPump Tertiary Single Turns the pump on and off.
TPumpV Tertiary Variable holding the button ramps the speed. Pressing twice at startup puts the
pump in Wave mode.
TPumpPlus Tertiary (Variable) Clicking increases the pump speed 1 step. holding ramps the speed up
until released.
TPumpMinus Tertiary (Variable) Clicking reduces the pump speed 1 step. holding ramps the speed down
until released.
Codes, Abbreviations, and Terms (cont.)