Balboa Water Group Titan Bath Control - Manual (Page 2)

Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,
834 b2, Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
2 7/14/14
Introduction
© 2013 Balboa Water Group
Intellectual ProPerty advIsement
All Intellectual property, as defined below, owned by or which is otherwise the property of
Balboa Water Group or its respective suppliers relating to the Balboa Water Group Titan Bath
Control System including but not limited to, accessories, parts, or software relating there to (the
“System”), is proprietary to Balboa Water Group and protected under federal laws, state laws,
and international treaty provisions. Intellectual Property includes, but is not limited to, inventions
(patentable or unpatentable), patents, trade secrets, copyrights, software, computer programs,
and related documentation, and other works of authorship. You may not infringe or otherwise
violate the rights secured by the Intellectual Property. Moreover, you agree that you will not (and
will not attempt to) modify, prepare derivative works of, reverse engineer, decompile, disassemble,
or otherwise attempt to create source code from the software. No title to or ownership in the
Intellectual Property is transferred to you. All applicable rights of the Intellectual Property shall
remain with Balboa Water Group and its suppliers.
end user WarnInG
This Installation Manual is provided solely to aid qualified spa
service technicians in installing spas with control systems
manufactured by Balboa Water Group. Balboa controls have
absolutely no end user serviceable parts. Balboa Water Group
does not authorize attempts by the spa owner/user to repair or
service any Balboa products. Non-qualified users should never
open or remove covers, as this will expose dangerous voltage
points and other dangerous risks. Please contact your dealer or
authorized repair center for service.
WarnInGs: danGer! rIsk of electrIc shock!
• All electrical work must be performed by a qualified
electrician and must conform to all national, state, and local
codes.
• Before making any electrical connections, make certain that
the Main Power breaker from the house breaker box has
been turned off.
• Do not attempt service of this control system. Contact your
dealer or service organization for assistance.
• Do not permit any electric appliance, such as a light,
telephone, radio, or television within 5* (1.5m) of a pool
or spa.
• Follow all owner’s manual power connection instructions.
• Installation must be performed by a licensed electrician and
all grounding connections must be properly installed.
• No user serviceable parts.
• Water temperature in excess of 38˚C may be injurious to
your health.
• Disconnect the electrical power before servicing.
• Keep access door closed
• To ensure continued protection against shock hazard, use
only identical replacement parts when servicing.