Panasonic VideoCam Suite 1.0 - Manual (Page 94)

Settings/Convenient information
Troubleshooting
94
When recording an image with 16:9
aspect ratio, the aspect ratio changes
to 4:3. z When an image with a 16:9 aspect ratio is automatically encoded and recorded,
the recorded image will be in 4:3 letterbox format with black bars above and below
the active image area.
When the produced disc is played
back on another device, zones
surrounding the image are not
displayed. z Depending on the playback screen (such as a TV, etc.), the zone surrounding an
image may not be displayed correctly.
Images cannot be added. z Images cannot be added to discs recorded using software other than this software.
The produced DVD disc can not be
played back. z DVD discs should be played back on devices that support specific disc types.
If the following problem occurs Check the following
Recording - SD card-
If the following problem occurs Check the following
The images located in [DVD-Video
list] cannot be recorded on an SD
card. z Use [Dubbing list] for recording on an SD card. Disable [Set the recording mode of
dubbing list to DVD-Video.] on the settings screen to display the [Dubbing list]
creation area.
An error message is displayed when
recording to an SD card. z The player may not support the format of the SD card. Refer to the operating
manual for your player and format the SD card using the player. (When the card is
formatted, all data on the card will be deleted.)
MC20_eng.book 94 ページ ２００７年１０月２４日 水曜日 午後２時１分