Panasonic VideoCam Suite 1.0 - Manual (Page 89)

Settings/Convenient information
Troubleshooting
89
Images do not play back properly.
z Close any other software that is running.
z Images played may have frame drops, colour-dulling or a jerky effect depending on
the [Windows Aero] functions of Windows Vista ® , the environment of the PC in use
or the images themselves. Also, there may be noise in the sound or images may
not be played back smoothly at the point where the resolution of the image and the
sound are switched.
z Update the device driver for the sound card.
Voice is not audible. z In the case of Windows Vista ® : Select [Control Panel] # [Hardware and Sound] #
[Sound] in the start menu, select [Speakers], and click [Properties]. Confirm that
[Use this device (Enable)] is selected in [Device usage] on the [General] tab, and
that [Speakers] and [WAVE] in the [Level] tab are not set to mute.
z In the case of Windows ® XP/2000: Confirm that [Volume control] and [WAVE] in
the [Volume control] window are not set to mute.
z Voice will not play back while the image is paused.
When an SD card is inserted, the
card is not displayed in the media/
folder selection area. z SD cards are not displayed when they are not connected before starting VideoCam
Suite. When an SD card is connected after starting VideoCam Suite, click the
[Settings] button, display the [Settings] screen, select the drive in the [SD] panel
and then click [OK] to display.
If the following problem occurs Check the following
MC20_eng.book 89 ページ ２００７年１０月２４日 水曜日 午後２時１分