Panasonic VideoCam Suite 1.0 User Manual
Page 90
Settings/Convenient information
Troubleshooting
90
Editing
If the following problem occurs
Check the following
Images cannot be edited.
z Use only images stored on the hard disk or images on a DVD-RAM disc for scene
editing (including scene splits and scene merges) or playlist editing. You must copy
images recorded on other media to the hard disk first.
z The only images that can be used to create a dubbing list are those stored on a
hard disk.
When a scene is split, a thumbnail
that differs from the image at the split
point is displayed.
z Since editing accuracy is about 0.5 seconds, a thumbnail that differs from the
image at the split point may be produced, but this is not a malfunction. (This
software is not capable of editing images frame-by-frame.)
Recording - DVD-Video -
If the following problem occurs
Check the following
Data cannot be recorded.
z You cannot record a video with no sound or less than two seconds long.
An error message is displayed when
a burning drive is selected.
z Close any other software using the drive.
z An error message may be displayed when a disc is replaced. Reselect the drive.
z Other recording software may be interfering with operation. In this case, uninstall
the other recording software.
A disc error message is displayed.
z If the type of DVD disc or the format does not support DVD-Video recording,
recording is impossible. (Supported discs:
)
MC20_eng.book 90 ページ ２００７年１０月２４日 水曜日 午後２時１分