Panasonic VideoCam Suite 1.0 - Manual (Page 92)

Settings/Convenient information
Troubleshooting
92
When the produced disc is played
back on another device, zones
surrounding the image are not
displayed. z Depending on the playback screen (such as a TV, etc.), the zone surrounding an
image may not be displayed correctly.
When the produced disc is played
back, the end of the image is slightly
truncated. z When recorded in DVD-Video format, the end of an image may be truncated by
about 0.5 seconds.
The produced disc cannot be played
back. z DVD discs should be played back on equipment that support specific disc types.
When the produced disc is played
back with another device, it is not
known how to display the chapter
menu. z It is possible to move to the chapter menu by pressing the [MENU] button on the
remote controller while playing videos of the title on the chapter menu you want to
display. (The name of the button varies with the model of the device.)
A DVD video camera cannot be
selected as a destination drive where
images are output. z This software cannot output images to a DVD video camera in DVD-Video format.
It is also not capable of initializing a DVD-RW disc on a DVD video camera.
If the following problem occurs Check the following
Recording - DVD-VR -
If the following problem occurs Check the following
The images located in [DVD-Video
list] cannot be recorded in DVD-VR
format. z Use [Dubbing list] for recording in DVD-VR format. Disable [Set the recording mode
of dubbing list to DVD-Video.] on the settings screen to display the [Dubbing list]
creation area.
MC20_eng.book 92 ページ ２００７年１０月２４日 水曜日 午後２時１分