Allied Telesis AT-PBC18 - Manual (Page 87)

PowerBlade PBC18 Installation Guide
87
Table 33 through Table 36 list the port specifications for the 100Base-FX
fiber optic port.
Table 33 Fiber Optic Transmitter
Model Fiber Optic Diameter
Optical
Frequency
Launch Power
1
Maximum Average Minimum
AT-PB201
AT-PB202
AT-PB204
AT-PB205
AT-PB206
AT-PB207 50/125 µm multimode 1310 nm -14.0 dBm -20.3 dBm -22.5 dBm
62.5/125 µm multimode 1310 nm -14.0 dBm -16.8 dBm -19.0 dBm
AT-PB202/1 9/125 µm single-mode 1310 nm -8.0 dBm -11.5 dBm -15.0 dBm
AT-PB202/2 9/125 µm single-mode 1310 nm 0.0 dBm -3.0 dBm -5.0 dBm
AT-PB202/3 9/125 µm single-mode 1310 nm 3.0 dBm 0.0 dBm -3.0 dBm
AT-PB202/4 9/125 µm single-mode 1310 nm 5.0 dBm -2.5 dBm 0.0 dBm
1. The launch power is measured at one meter from the transmitter.
Table 34 Fiber Optic Receiver
Model Fiber Optic Diameter
Optical
Frequency
Receive Power
Minimum
Sensitivity Typical
Sensitivity
Saturation
AT-PB201
AT-PB202
AT-PB204
AT-PB205
AT-PB206
AT-PB207 50/125 or 62.5/125 µm
multimode 1310 nm -31.8 dBm -34.5 dBm -14.0 dBm
AT-PB202/1 9/125 µm single-mode 1310 nm -31.0 dBm -31.0 dBm -8.0 dBm
AT-PB202/2 9/125 µm single-mode 1310 nm -35.0 dBm -38.0 dBm 0.0 dBm
AT-PB202/3 9/125 µm single-mode 1310 nm 0.0 dBm -39.0 dBm -3.0 dBm
AT-PB202/4 9/125 µm single-mode 1310 nm 0.0 dBm -39.0 dBm -3.0 dBm