Allied Telesis FORMULA 8200 - Manual (Page 99)

FORMULA 8200 User’s Guide
5-21
ETHERNET/SHOW/PORT Example
To display information about the Ethernet interface port
configuration:
Use the ETHERNET/SHOW/PORT command.
A similar display appears:
ETHERNET/SHOW/COUNT Example
To display Ethernet statistics:
Use the ETHERNET/SHOW/COUNT command.
A similar display appears:
/ETHERNET/SHOW> port
Physical Port#
================ Autoneg
========= Speed
======= Duplex
=======
1 off 100MBPS HALF
2 on 100MBPS HALF
3 off 100MBPS HALF
4 off 100MBPS HALF
5 on 100MBPS HALF
/ETHERNET/SHOW/COUNT 1
PORT#1 RX/TX Statistics
**************************************************
TX bytes: 103488
TX frames:
UniCast: 0 MultiCast: 1617 BroadCast: 0
TX errors:
Fcs: 0 txUndrErrs: 0
ExcessColl: 0 OneColl: 0 multiColl: 0
RX bytes: 0
RX frames:
UniCast: 0 MultiCast: 0 BroadCast: 0
rx64: 0 rx65to127: 0 rx128to255: 0
rx256to511: 0 rx512to1023: 0 rx1024to1518: 0
RX errors:
Fcs: 0 AlignOrErr: 0 rxGoodOverSz: 0
rxErrOverSz: 0 rxGoodUndSz: 0 rxErrUndSz: 0
discBuffFull: 0 discMemFull: 0