Allied Telesis FORMULA 8200 - Manual (Page 9)

FORMULA 8200 User’s Guide
ix
How This Guide Is Organized
This guide consists of the following sections:
Chapter 1, Overview , provides a product overview and a list of
common features that apply to all switch models.
Chapter 2, Accessing the Command Line Interface (CLI) , provides
information on attaching a console port and accessing the command
line interface (CLI) to enter basic configuration parameters.
Chapter 3, Configuring the FORMULA 8200 Switch , provides
procedures to configure the FORMULA 8200.
Chapter 4, Operating and Managing the FORMULA 8200 Switch ,
provides procedures to monitor the FORMULA 8200 and perform
routine management tasks using the CLI.
Chapter 5, Command Reference , includes a description of all the
commands and provides examples on where to use these
commands.
Appendix A, Command Summary , is a table that lists all
FORMULA 8200 commands in alphabetical order, their
corresponding aliases, and the purpose of each command.
Appendix B, RMON Configuration , provides a sample procedure to
configure your SNMP management station to manage and monitor
the FORMULA 8200 switch.
Appendix C, Downloading Software at the [VxWorks] Prompt ,
provides the alternative procedures to upgrade switch software if
the switch CLI is not accessible.
The Index at the back of this guide is according to subject matter.
For a definition of terms commonly used in Allied Telesyn technical
publications, refer to the website glossary at
www.alliedtelesyn.com .