Quickly press any key to return to the [vxwork, Enter c to set the boot parameters for loading, Respond to each prompt, basing your entries on – Allied Telesis FORMULA 8200 User Manual
Page 158: Tablec4 parameters for loading the new image fi, At the [vxworks boot]: prompt, enter @ to boot
FORMULA 8200 User’s Guide
C-12
12. Quickly press any key to return to the
[VxWorks Boot]
prompt.
13. Enter c to set the boot parameters for loading the new image file.
14. Respond to each prompt, basing your entries on Table C-4.
15. At the
[VxWorks Boot]:
prompt, enter @ to boot the new
firmware from the switch:
You are done. You may now restore your backed up configurations.
[VxWorks Boot]: c
‘.’=clear field; ‘-’=go to previous field; ^D=quit
boot device:
Table C-4
Parameters for Loading the New Image File From Flash
System Prompt
User Entry
boot device:
flash
processor number:
0
host name:
Press [Return]
file name:
/flash/firmware
inet on Ethernet (e) :
Press [Return]
host inet (h) :
Press [Return]
gateway inet (g) :
Press [Return]
user (u) :
Press [Return]
ftp password (pw) (blank = use rsh):
Press [Return]
flags (f) :
0x8
target name (tn) :
Press [Return]
startup script (s) :
Press [Return]
other (o) :
Press [Return]
[VxWorks Boot]: @