Allied Telesis FORMULA 8200 - Manual (Page 93)

FORMULA 8200 User’s Guide
5-15
ELOG/CLEAR Example
To clear the error log:
Use the ELOG/CLEAR command.
A similar display appears:
ELOG/CURRENT Example
To show the error log’s current ten default errors:
Use the ELOG/CURRENT command.
A similar display appears:
Note
The error log is for Allied Telesyn’s Technical Support use.
ELOG/ clear
System trace log is reset to record 0
/ELOG >
/ELOG >current
(4/21/97 14:8:22) Code: 3 Level: 0 - Warning : Not tested
(4/21/97 14:8:22) Code: 3 Level: 0 - Warning : Not tested
(4/21/97 14:8:22) Code: 3 Level: 0 - Warning : Not tested
(4/21/97 14:8:22) Code: 3 Level: 0 - Warning : Not tested
(4/21/97 14:8:22) Code: 3 Level: 0 - Warning : Not tested
(4/21/97 14:8:22) Code: 3 Level: 0 - Warning : Not tested
(4/21/97 14:8:22) Code: 3 Level: 0 - Warning : Not tested
(4/21/97 14:8:22) Code: 3 Level: 0 - Warning : Not tested
(4/21/97 14:8:22) Code: 3 Level: 0 - Warning : Not tested
(4/21/97 14:8:32) Code: 1702 Level: 2 - GSR Error = 0x0xff000000
/ELOG >