Allied Telesis FORMULA 8200 - Manual (Page 152)

FORMULA 8200 User’s Guide
C-6
6. Respond to each prompt, beginning with the boot device. Base
your entries on Table C-1.
This returns you to the [VxWorks Boot]: prompt. You are
now ready to download the new software to flash.
7. Enter Z at the prompt and confirm, as in the following sample
screen:
Table C-1 Parameters for Downloading the Image Software to Flash
If You See This Prompt You Must Enter
boot device: hs
processor number: 0
host name: Your TFTP server’s host name
file name: The image filename or complete
path
inet on Ethernet (e) : The FORMULA 8200’s IP address
host inet (h) : Your TFTP server’s IP address
gateway inet (g) : Leave blank . Note that you are
performing the download within
this local subnet; therefore, you
must not enter a gateway address
here.
user (u) : User login for the TFTP server
ftp password (pw) (blank = use rsh): Password for the TFTP user
flags (f) : 0x80
target name (tn) : Press [Return]
startup script (s) : Press [Return]
other (o) : Press [Return]